Alcohol Methanol water Injection

by **1250cinqturbo (ADMIN)** Tue Mar 08, 2011 8:29 pm

Alcohol Water Injection - DevilsOwn

DevilsOwn strives to be the best provider for your Alcohol Water Injection System needs. They offer a complete selection of parts and accessories at the best prices for most supercharged and turbocharged vehicles. Among these are a number of custom built parts you can only find at DevilsOwn. There newest addition is our custom-built check valve. This nickel plated brass check valve not only looks great but also insures anti-siphon protection. In addition, Shurflo has adapted their 150 PSI pump for us so it will work specifically for alcohol/water injection.

Alcohol/water injection is a method for cooling the combustion chambers of engines by adding methanol/water mix to the incoming air-fuel mixture. This allows for greater compression ratios and largely eliminating the problem of engine knocking due to detonation. Many alcohol-water injection systems use a mixture of water and alcohol (usually 50/50), partly because the alcohol is combustible and will raise the octane level of the fuel. While water is not combustible, it has a greater capacity to cool the intake air temps down more than methanol alone. This effectively increases the octane rating of the fuel allowing performance gains to be obtained when used in conjunction with a supercharger or turbocharger, altered spark ignition timing, and increased boost levels.

Alcohol Methanol water Injection 190303_200710199957780_100000564053783_674094_3065379_n

Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30