NOBLE MOTORSPORT members attending list and dates

now are you sure all the info is right lmao you know me lol i'm in

Same i'm still in.

I'm still in too and looking forward to the day.

The date works out better for me as it gives me a bit more tinkering time!

Can you add chrisw880,Clarkey666,softscoop
from Briskoda please Jason.

Ryan90VRS wrote:Can you add chrisw880,Clarkey666,softscoop
from Briskoda please Jason.

Yes i will mate, thanks for additions there much appreciated see if they dont mind signing up so i can keep everyone informed and organise it all properly

Jason

OK

Looks like skoda are beating the fiats now

what cars jube got?

Jube has a Fiat haha, and if they look like beating the Fiats then i might have to blow the dust of the Cinq and show the rollers at Nobles a hard time haha

Hi guys, Softscoop from Briskoda here.
First RR of 2011, lets hope I don't get too much clutch slip, unlike last time on the rollers

1250cinqturbo (ADMIN) wrote:Jube has a Fiat haha, and if they look like beating the Fiats then i might have to blow the dust of the Cinq and show the rollers at Nobles a hard time haha

I think you should i'd love to see that thing go your dad has told me all about it lol

softscoop wrote:Hi guys, Softscoop from Briskoda here.
First RR of 2011, lets hope I don't get too much clutch slip, unlike last time on the rollers

Welcome, Thanks for joining pal. I can't wait either my first RR ever! Love to see what the Furby's kicking out!

softscoop wrote:Hi guys, Softscoop from Briskoda here.
First RR of 2011, lets hope I don't get too much clutch slip, unlike last time on the rollers

welcome

glad to have you at the rollers with us, lets here more about the car

Ryan90VRS wrote:

1250cinqturbo (ADMIN) wrote:Jube has a Fiat haha, and if they look like beating the Fiats then i might have to blow the dust of the Cinq and show the rollers at Nobles a hard time haha

I think you should i'd love to see that thing go your dad has told me all about it lol

haha, yes he said.....he spoke about it back when it was running 120bhp, its a totaly different monster now

Welcome to the forum

we are upto 9 people one more to bring the price to 35 per car and another 6 or more to make it 30 per car

Jason

you'll have to take me for a spin in it jason sound like a beast i can't believe its a 1.2!

lol, i will do mate, there a small list of people wanting the same thing lol, mainly because it spends most of its time of road haha

defo up for this now the 200sx is gone, time to see what the scoobys putting out, cause it aint slow. Or maybe a audi a3 1.8t quattro might be turning up, if i sort a deal out this week, hmmm?

1250cinqturbo (ADMIN) wrote:

softscoop wrote:Hi guys, Softscoop from Briskoda here.
First RR of 2011, lets hope I don't get too much clutch slip, unlike last time on the rollers

welcome

glad to have you at the rollers with us, lets here more about the car
:

2003 Fabia vRS, stage 1 map, PD160 intake with a panel filter to match. 312mm brakes fitted up front too.

It only ran 158bhp last time, but the first 2 runs were abandonded as it was slipping. I suspect it was down to a glaze on the surface, as over the past few months it seems to have been behaving itself.
I'll be running a lot more millers this time so I'm hoping for a bit more.

Should be a fun day as the way upto Chesterfield is a good little run from Lincoln

Hi,

chrisw880 from Briskoda

Hi Chrisw880 and welcome

softscoop wrote:

1250cinqturbo (ADMIN) wrote:

softscoop wrote:Hi guys, Softscoop from Briskoda here.
First RR of 2011, lets hope I don't get too much clutch slip, unlike last time on the rollers

welcome

glad to have you at the rollers with us, lets here more about the car
:

2003 Fabia vRS, stage 1 map, PD160 intake with a panel filter to match. 312mm brakes fitted up front too.

It only ran 158bhp last time, but the first 2 runs were abandonded as it was slipping. I suspect it was down to a glaze on the surface, as over the past few months it seems to have been behaving itself.
I'll be running a lot more millers this time so I'm hoping for a bit more.

Should be a fun day as the way upto Chesterfield is a good little run from Lincoln

great spec list! similar to a seat ibiza tdi 130we have on the forum and he made 180bhp! so lets hope the clutch holds for you

chrisw880 wrote:Hi,

chrisw880 from Briskoda

welcome to the forum

Jason

1250cinqturbo (ADMIN) wrote:

softscoop wrote:

1250cinqturbo (ADMIN) wrote:

softscoop wrote:Hi guys, Softscoop from Briskoda here.
First RR of 2011, lets hope I don't get too much clutch slip, unlike last time on the rollers

welcome

glad to have you at the rollers with us, lets here more about the car
:

2003 Fabia vRS, stage 1 map, PD160 intake with a panel filter to match. 312mm brakes fitted up front too.

It only ran 158bhp last time, but the first 2 runs were abandonded as it was slipping. I suspect it was down to a glaze on the surface, as over the past few months it seems to have been behaving itself.
I'll be running a lot more millers this time so I'm hoping for a bit more.

Should be a fun day as the way upto Chesterfield is a good little run from Lincoln

great spec list! similar to a seat ibiza tdi 130we have on the forum and he made 180bhp! so lets hope the clutch holds for you

Ah yes I looked at Ibizas before the furby, but they just didn't feel like my kinda car.
One of my mates had an Ibiza Cupra TDi though...now that was a fun car
It had a p155 poor map on it though, so was just continuous black soot when it was boosting. No wonder his turbo went big-style. It sheared the manifold off the block, only about half of the turbo remained, leaving a massive oil slick and bits of turbo strewn down the road...

I'm looking forward to this, and I'm hopeful of making 130-135 bhp and 225-230 lb/ft

chrisw880 wrote:I'm looking forward to this, and I'm hopeful of making 130-135 bhp and 225-230 lb/ft

Are you the guy with the red PD100 I met as RS back in October?

softscoop wrote:

chrisw880 wrote:I'm looking forward to this, and I'm hopeful of making 130-135 bhp and 225-230 lb/ft

Are you the guy with the red PD100 I met as RS back in October?

Yes, this time I'm going to change the setting on the tuning box before it goes on the rollers, if I remember